Desktop and PC data recovery

Desktop PC data recovery prices

AdatVissza provides professional data recovery for storage taken from desktop PCs: hard disk drives (HDD), SATA SSDs and NVMe SSDs. We use industry‑standard hardware (PC‑3000 Portable III with Data Extractor), so we can handle a wide range of scenarios from logical damage to firmware/controller anomalies and typical HDD mechanical issues. The diagnostic fee is credited if recovery succeeds; in typical cases we work on a “no data – no fee” basis.

Pricing – guide ranges; depend on type and fault

HDD data recovery (net, guide prices):

• Electronic fault (PCB): from 39,000 HUF
• Firmware / SA (service area) repair: from 49,000 HUF
• Logical damage: from 85,000 HUF
• Physical damage (e.g., head assembly, head crash): from 95,000 HUF
• Bearing issues / platter swap: from ~120,000 HUF

(Actual price depends on the fault and capacity; exact quote after diagnostics.)

SATA SSD data recovery (net, guide; no chip‑off, PC‑3000 + DE):

• Logical damage net: 50.000 – 150.000 HUF
• Controller/firmware‑type faults (supported controllers):
  – Up to 120 GB: 90.000 – 160.000 HUF
  – 120–512 GB: 140.000 – 220.000 HUF
  – 1–2 TB: 180.000 – 300.000 HUF
  – over 2 TB / rare controllers: custom quote

NVMe SSD data recovery (net, guide; no chip‑off, PC‑3000 Portable III + DE):

• Logical damage: from 70,000 HUF (typically 70,000 – 180,000 HUF)
• Controller/firmware‑type faults (supported controllers):
  – Up to 1 TB: approx. HUF 90.000 – 180.000
  – over 1 TB: ~140,000 – 280,000 HUF

What we recover?

• HDD (3.5" and 2.5" desktop/notebook drives, also when removed from USB enclosures)
• SATA SSD (M.2/SATA, 2,5″ SATA)
• NVMe SSD (M.2 PCIe, very common in modern desktops)

What to expect?

• Write‑blocked, non‑intrusive diagnostics (source kept intact)
• Sector‑level imaging with PC‑3000 DE
• File‑system recovery (NTFS/EXFAT/APFS, etc.) and directory tree reconstruction
• Delivery on your requested target media, verified with sample file opens

Recovery process

1) Diagnostics & write‑blocked intake: we register the device and examine the source without writing to it.
2) Stable access: for HDD we repair firmware/SA modules as needed; for SSD/NVMe we use tech mode/loader and rebuild translator/L2P in situ (on supported controllers).
3) Bit‑perfect image: created with gentle reading profiles (timeouts, retries, throttling awareness).
4) File‑system recovery: the directory tree and files (photos, videos, documents, emails, databases) are restored from the image.
5) Verification and delivery: we verify with sample file openings, then deliver the data on the requested media.

Technology & toolset

• PC‑3000 Portable III + Data Extractor (DE) – industry standard
• SSD Utility in‑situ functions: ROM/FW backup, microcode patching, L2P/translator rebuild
• Background process management: GC/TRIM suppression, stabilised reading
• HDD firmware/SA module repair; clean‑room work if physical intervention is required

When NOT to power it on?

• Clicking, scraping sounds, heavy slow‑down, “drive not detected” — power off immediately.
• Suspected head/platter damage: each additional spin‑up may worsen the condition.
• After delete/quick format: do not reinstall or copy new data (TRIM risk on SSDs!).

Turnaround times

• Logical faults: typically 1–3 business days
• Controller/firmware faults: 4–9 business days (depending on complexity)
• Physical HDD faults: vary depending on parts and clean‑room work

Contact
Phone: +36 30 370 7307
E‑mail: info@adatvissza.hu
Request a quote: available via our web form.

Note: Prices and lead times are indicative; final quotation and ETA are provided after diagnostics.