In recent days was dealing with a very poor state hard drive. After clean-space with the breakdown was seen entering a point where you start with a small scratch, and without a visible marking of approx. 2mm ring-like seizing.

The damage was severe, but the owner asked us to attempt recovery under the circumstances. The first task was to transfer the platters, a particularly delicate operation in a drive with three platters. The magnetic platters and spacers are secured to the spindle; releasing them can allow the platters to rotate relative to one another, creating further problems. Their relative alignment therefore had to be preserved. This stage required specialist tools made in-house. After reassembly, the drive started normally, but we needed to disable the head serving the scratched surface. We created a physical image using the other five heads. Fortunately, the damaged surface affected only a few MP3 music files that were not important to the owner. All the data the owner needed could be restored, so the result was successfulconsidered data recoveryperformed on the scratched hard drive with a bearing fault. 🙂