NVMe SSD Data Recovery – Fast, Gentle Solution with PC-3000 Portable III

As NVMe SSD data recovery specialists, we use tools and procedures specifically designed for PCIe/NVMe drives. The PC-3000 Portable III hardware analyzer and its SSD Utility allow professional, low-level access to faulty NVMe SSDs, enabling drive stabilization and secure cloning of raw data. PC-3000 Portable III hardware analyzer and its SSD Utility allow professional, low-level access to faulty NVMe SSDs, enabling drive stabilization and secure cloning of raw data.

When Do You Need NVMe SSD Data Recovery?

• The computer does not see the SSD, or the volumes disappear.
• Slowdown, freezing, blue screen of death (BSOD), "Inaccessible Boot Device."
• File system error (RAW volume, “needs to be formatted” message).
• Firmware/controller faillure, SMART warnings, overheating.
• Accidental deletem, after TRIM data loss, damaged partition table.
• BitLocker/OPAL encrypted volumes (with the correct key or recovery key).

Tip: If your NVMe SSD fails shut down the system immediately. Do not run CHKDSK or write to the drive—any further write operations reduce the chances of successful recovery.

What Makes NVMe SSD Recovery Different?

NVMe drives communicate through the PCIe interface with high parallelism (queues), complex wear leveling, and translation tables (FTL). When errors occur, bus instability, controller safe mode, or power/thermal management disconnections are common. These situations require hardware stabilization and the use of vendor‑specific commands.

Our Process – Step by Step

1. Diagnostics (free pre‑inspection): Identify the issue (logical / firmware / controller / NAND).
2. Stabilization with PC-3000 Portable III:
   – Controlled power delivery, power‑cycle profiles, PCIe link management, NVMe Tech/Safe modes.
   – Disabling background processes (GC, TRIM) where possible.
3. Write‑protected cloning: Full forensic imaging with error handling and retry strategies.
4. File system recovery: NTFS/EXFAT/FAT/APFS, partition table/boot record reconstruction.
5. Encryption handling: BitLocker/OPAL key verification; decryption with supplied key.
6. Data verification and delivery: We provide a file list of recoverable data; transfer to an external drive or encrypted archive.

What the PC-3000 Portable III Can Do on NVMe SSDs

• PCIe/NVMe low-level commands and vendor‑specific functions.
• Stable reading of degraded or overheating drives.
• Selective read‑retry, whitelist/blacklist of LBA ranges.
• “Read‑only” imaging to prevent further damage to the source SSD.
• Logging and statistics to assess recoverable versus damaged data.

Supported Form Factors and Brands

• M.2 (M-key/B-M-key) 2230/2242/2260/2280, U.2/U.3, less often AIC (Add-in Card).
• Samsung, WD/SanDisk, Kingston, Crucial/Micron, SK hynix, Intel, Kioxia, Phison/E12-E18/E21, Innogrit, Silicon Motion stb.

What NOT to Do With a Faulty NVMe SSD?

• Do not reinstall an operating system, run CHKDSKor “repair” software.
• Do not freeze or overheat the drive—thermal shock can worsen NAND damage.
• Do not attempt “firmware flashing” at home—it can cause permanent data loss.